LS Electric Servos Systems from AutomationDirect

DCS Automation Direct LS Electric Servos 1 400

November 23, 2021

 

AutomationDirect has added LS Electric servos systems that provide extremely accurate motion control and include the most requested features – setup wizards, auto-tuning, built-in indexer, and more – in an extremely cost-effective package. The L7S family of brushless servo systems is fully digital and capable of covering a broad range of motion control applications.

There are five standard servo motors from 100W to 1kW that can be operated in combination with one of two standard servo drives. The L7C drives accept single-phase 200-230VAC and are controlled via analog speed or torque signal, high-speed pulse train, or internal indexing. Setup is easy using the built-in keypad/display or the FREE DriveCM PC-based software. These systems are fully compatible with most AutomationDirect PLCs or any other host controller.

The L7C family includes standard accessories such as pre-made servo motor encoder cables and servo motor power/brake cables. DIN-rail mount I/O break-out kits allow for easy connection of external command and I/O signals; optional external braking resistors and optional AC input filters are also available. 

 

 

LS Electric® L7C Servo Systems – Servo Motors and Servo Drives … New!

DCS Automation Direct LS Electric Servos 2

Drive Features

  • Easy setup and diagnostics with built-in keypad/display or the DriveCM PC-based software
  • Field upgradeable firmware ensures the drive can always be upgraded to the latest operating system
  • Command options include:
    • ±10V torque or velocity command
    • Pulse train or master encoder position command
    • Real-time selectable electronic gearing
  • Internal Indexer for position/speed-based moves:
    • 64 individual move statements can be configured
    • Each move includes distance, speed, accel, decel, and dwell parameters
    • Set up through DriveCM software or via serial comms (PLC, HMI, w/ Modbus via RS485 or RS422)
    • The move can be initiated via Digital Inputs or through serial comms
    • Index profiles include relative or absolute moves, registration, blended moves, and positive/negative/shortest distance rotary table moves.
  • Two auto-tuning modes:
    • Off-Line auto tuning (the drive initiates moves while auto-tuning)
    • On-Line auto tuning (an external controller sends move commands during auto-tuning)
    • Manual tuning allows the user to adjust all tuning values
  • Optically isolated digital I/O:
    • 10 inputs
    • 5 general purpose, configurable outputs
    • 3 outputs permanently configured for alarm & status codes
    • 1 line driver output for encoder (with scalable resolution)
  • Software-based oscilloscope feature that can monitor a variety of command and status signals, including output speed, torque, power, and more
  • Standard 50-pin DIN-rail mounted break-out kit for the drive’s CN1 connector (with screw terminal connections), or 50-pin cables with flying leads

 

Servo Motor Features:

  • Five low inertia models:
    • 100W, 200W, 400W, 750W and 1kW
    • Speeds up to 5,000 rpm
  • Permanent magnet 3-phase synchronous motors
  • Keyed drive shafts support clamp-on style couplings or key-style couplings
  • Integrated encoder with 17-bit resolution (131,072 pulses per revolution)
  • Optional 24 VDC spring-set holding brakes (AYK2 motors)
  • Standard hook-up cables for motor power, encoder, and brake in standard or flex-rated lengths of 3, 5, 10, and 20m

 

The L7C servo system selector tool is available here; it provides selection assistance for your application requirements and assures that all the required and optional accessories are included in your first order.

 

For more information on the LS Electric servo systems, click here 

 

Related Articles

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Case Study: Optimizing Harmonic Mitigation in Wastewater Treatment

    June 22, 2026 Segment and Application In a municipality, wastewater treatment plants typically stand out as the main consumers of electricity. The operational processes exhibit significant load variations throughout a 24-hour cycle, necessitating the use of AC drives to regulate pumps, blowers, and other motorized equipment in response to fluctuating demand. In one wastewater treatment… Read More…

  • Why Do Mission-Critical Facilities Need Seismic-Rated Server Racks?

    June 17, 2026 When organizations think about seismic preparedness, they typically focus on buildings, backup generators, and emergency response plans. However, one critical component is often overlooked: the rack supporting the network infrastructure. For hospitals, emergency operations centers, municipal facilities, utilities, and public safety agencies, network connectivity is essential during and after a seismic event.… Read More…