Festo Motion Control Package: Making Motion Control Setup and Integration, Quick and Easy

September 13, 2018

The Festo Motion Control Package   (FMCP) gives machine and system designers the best of two worlds: a complete, optimized motion control kit for running a Festo handling system – and easy integration and setup of that robot through the user’s PLC, whatever the brand. The FMCP can coordinate motion of up to six axes for pick and place and other precision Cartesian robotic applications. Available as a pre-wired and ready-to-install control solution, it provides the kinematics for H-portal, T-portal, 2D, and 3D Festo standard gantry systems. At the PLC, OEMs configure Cartesian motion applications using the FCMP’s software function blocks – with no specialized programming knowledge required.

Two years ago, Festo unveiled the Handling Guide Online (HGO) configuration tool for streamlining design of Cartesian robots. By inputting basic application information such as load, cycle time, load voltage, and workspace size, an engineer utilizing this configurator specifies a single axis, 2D, or 3D Cartesian robot and receives a CAD drawing for that robot in about 20 minutes. Quotes arrive on average within 48 hours. OEMs then have the option of ordering a gantry fully assembled and pre-tested or as disassembled modules.

Now, Festo has taken HGO to a new level by offering the FMCP as a complete solution – robotic motion controller, cabinet, components, wiring and quick connection – that can be ordered during the same configuration process. The control cabinet arrives fully wired and ready to be installed.

With the FMCP, all the OEM has to do to get the Festo robot up and running is connect power, Ethernet, IO, and quick-connecting cabling to the gantry motors, then use the function block to fill in key motion parameters. No specialized or manufacturer specific programming knowledge is required. Basic motion can be taught through a webserver or IOS/Android app. The FMCP also offers a solution for end-of-arm-tooling. By including an IO-Link connection, the FMCP can control eight external digital inputs and eight digital outputs that are available in the standard function block.

For more information HERE

Related Articles

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Applications of Physical AI in Canadian Sectors

    June 23, 2026 Physical AI — the convergence of artificial intelligence with robotics and autonomous motion systems — is reshaping how Canadian industries operate. Across sectors from healthcare to mining, AI-enabled machines are performing tasks that were once entirely dependent on human intervention. But deploying Physical AI effectively requires more than sophisticated algorithms: it demands… Read More…

  • Case Study: Optimizing Harmonic Mitigation in Wastewater Treatment

    June 22, 2026 Segment and Application In a municipality, wastewater treatment plants typically stand out as the main consumers of electricity. The operational processes exhibit significant load variations throughout a 24-hour cycle, necessitating the use of AC drives to regulate pumps, blowers, and other motorized equipment in response to fluctuating demand. In one wastewater treatment… Read More…