B&R Automation: Torque safely under control

 

June 20, 2019

B&R offers servo drives with safety function Safely Limited Torque

The B&R ACOPOS P3 servo drive is now also available with safety function Safely Limited Torque (SLT). This makes B&R one of the first manufacturers to offer this certified safety function. Safely Limited Torque safely monitors torque up to SIL 2 / PL d.

The torque is limited to the configured maximum value with the aid of current measurement integrated directly in the drive system. Since the safety function runs decentrally in the drive, an extremely short maximum fault detection time of 8 ms is guaranteed. Particularly when combined with other safety functions such as Safely Limited Speed or Safe Direction, the SLT function facilitates safe collaboration between human operators and their machines. The risk of operators being injured via pinching or crushing while working on a machine is minimized.

Safe prevention of mechanical overload

SLT can also be used to safely limit the load on mechanical systems. In this way, the safety function acts like a torque wrench that prevents over-tightening of screws. SLT can therefore be used as a protective measure against overloading drive axes and brakes. As a result, it is possible to use less expensive mechanical components since there is no need to account for torque spikes.

For more information, visit HERE.

Related Articles

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Teaching Machines to See: Why Sensor Fusion Demands a System-Level Approach

    March 16, 2026 By David Doria, Director of Engineering, Automated Driving, Magna Electronics, March 16, 2026 For years, progress in advanced driver assistance systems (ADAS) were driven by improving individual sensors. Higher resolution cameras. Longer-range radars. More precise lidars. Each step delivered incremental gains. But optimizing sensors in isolation only goes so far. As ADAS Read More…

  • Vention Raises the Bar for Automating Automation with New Funding and Solutions

    March 9, 2026 By Krystie Johnston Vention accelerates democratization of automation with new funding and GRIIPTM, sets sites on Enterprise clients, reaches more industries and geographies Vention is on a journey to democratize automation, and they are picking up speed. Already, in Q1 of 2026, they have made two announcements that will accelerate their trajectory Read More…