Advanced Motion Controls Releases the FM060-25-CM Micro-Sized High-Power Servo Drive

February 8, 2021

The FM060-25-CM is part of a new breed of micro-sized, high-power servo drives, immediately available from ADVANCED Motion Controls. Rated to output 25A continuous and 50A peak, this fully featured digital servo drive is small enough to fit in the tightest locations.  It is ideally suited for mobile and portable applications such as mobile robotics, automated mobile robots (AMRs), AGVs, material handling, warehouse automation, lab automation and more.

The mounting footprint of the FM060-25-CM is 50.8mm x 25.4mm with a height of 22.1mm making it possible for up to 3 units to fit within the footprint of a standard business card.  The FM060-25-CM uses CANopen for network communication.  Along with this model are two lower current options, the FM060-10-CM rated to 10A continuous and FM060-5-EM rated to 5A continuous, designed to the same dimensions.

Features include:

  • 8 x 25.4 x 22 mm (2 x 1 x 0.87 in)
  • 10-55 VDC input
  • 25 A continuous, 50 A peak for FE060-25-CM
  • 10 A continuous, 20 A peak for FE060-10-CM
  • 5 A continuous, 10 A peak for FE060-5-CM
  • Incremental encoder and BISS C-mode feedback
  • Torque, velocity, and position operating modes

The FM060-25-CM can be configured to work with any servo motor because the control loops for Current, Velocity and Position can be individually tuned to match the application’s motor, load inertia, supply voltage and motion requirements. 

Once configured for the system, the FM060-25-CM can be controlled over a CANopen network using PVT commands or profile motion commands. It can also be commanded using analog signals, indexes & sequences, step & direction, and encoder following.  Despite its small size, no feature or capability has been spared when compared with full-sized counterparts.

Information on the FM060-25-CM can be viewed at:  https://www.electromate.com/fm060-25-cm/.

Related Articles

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Labeling Cables and Wires

    February 3, 2026 Choosing the right wire marker or cable label Cable and wire labeling is critical in the identification, assembly, and repair of electrical control panels, wire harnesses, and data/telecommunications systems. It is an upfront cost that saves time and labor expenses when changes or repairs need to occur to the systems you work Read More…

  • ITC 101: Understanding NEMA Ratings for Electrical Enclosures

    February 3, 2026 Understanding NEMA Ratings for Electrical Enclosures NEMA Ratings are an essential classification system used across North America to define the environmental and mechanical protection provided by electrical enclosures. Developed by the National Electrical Manufacturers Association (NEMA), these ratings help engineers, installers, and specifiers identify the appropriate enclosure type for industrial, commercial, and outdoor Read More…